3MÖ 790 Static Monitor

A cost efficient unit that is small, compact and versatile in its usage and may be mounted directly onto device handling equipment, testers, and auto insertion equipment.
Housed in static dissipative plastic, the 790 works by measuring the voltage potential on a person referenced to earth ground. The 790 uses a slide switch allowing the user to select the voltage level necessary for the specific job function being performed.

The 790 has two wrist strap input jacks located on its front, which allows two operators to use on 790 monitor unit at a workstation simultaneously. Power is supplied to the 790 through an AC adapter.

Three distinct alarms make it easy to identify operators and the type of fault condition. The audible alarm can be adjusted to a low or high level to overcome background noise from other equipment that may be in use in the area. Ring terminals on the end of the 790's ground and chassis cords provide a permanent connection.

Product Features

• Audible and visible alarms
• Compact system
• Pre-select test voltages 1V, 3V, 6V, & 9V
• Static-dissipative plastic housing
• Mounts easily to ESD worksurface
• Regulatory Compliance: UL & CE
• Effective 8/1/2005, this product is WEEE compliant

The 3M 790 Static Monitor system includes a mounting plate with adhesive, an AC adapter, and two ground cords with a two-wire connector.

Item	Typical Properties
Monitor Size	3.5" x 4.0" x 1.25" (88,9mm x 101,6mm x 31,8mm), approximate
Input	120 Vac ±10% (North America)
Output	25 Vdc @ 50 mA rated load
Output Plug Polarization	Center negative
Output Plug Dimensions	5,5mm O.D. x 2,1mm I.D. x 9,5mm length
Voltage Detection Levels	(1V ±15%) (3V,6V, & 9V ±10%)
Ground Disconnect	10 ohms ±20%
Temperature	Maximum 104°F (40°C); minimum 50°F (10°C)
Humidity	Maximum 75% relative humidity

(3M Id : 98-0798-5185-7)
(GTIN(UPC/EAN) : 0 00 51135 17613 9)