Pace MBT 250-SD Digital High Performance Rework System

The MBT 250 provides the user with the power and versatility to remove and install virtually all SMD and Thru-Hole components. Self-contained, three channel capability offers high capacity, low temperature soldering and desoldering. A digital readout displays the current channel's temperature information, error codes and programming status. The MBT 250 systems feature PACE's unique Tip & Temperature Selection System with Auto Tip Offset Compensation which allows the user to Set and Display the True, Correct Tip Temperature for any size and type of tip or handpiece.

This station comes with the SX-90 Desolder Handle and the PS-90 Soldering Iron.

Rework Tips sold separately.

Features:

• Operates any three SensaTemp handpieces simultaneously
• AUTO Snap-VAC improves thru-hole desoldering performance, increases tip life
• "QUIET FLO" pump for vacuum and pressure
• Continuous automatic calibration
• Automatic tip offset compensation system
• Automatic or manual tip temperature setback and power down, constant memory

Technical Specifications:

• Power Requirements: 115VAC, 60Hz 184 Watts
• Dimensions: 135mm H x 165mm W x 260mm D (5.3" H x 6.5" W x 260mm D)
• Weight: 5Kg (10lbs.)
• Tip to ground resistance: 2 ohms or less
• Temperature Stability: ± 1.1°C (± 2°F) at idle tip temp.
• Temperature Range: 38° to 482°C (100°to 900°F) nominal
• Vacuum and Air Vacuum Rise Time: 200ms average as measured by PACE Process Monitor
• Vacuum: 25cm Hg. (10" Hg.) nominal
• Pressure: .48 Bar (7 p.s.i.) nominal at maximum setting
• Airflow: 9 SLPM (0.32 SCFM) maximum

User Manual Calibration Procedure