Desco Foot & Wrist Strap Tester

The Desco EMIT Dual Independent Footwear and Wrist Strap Tester is designed to test personal grounding devices, wrist strap and ESD footwear, to satisfy the requirements and the recommendations of the ESD Association.

Per ANSI/ESD S20.20 Paragraph 6.2.2.2 Personnel Grounding Guidance "A log should be maintained which verifies that personnel have tested their personal grounding devices. (Wrist Straps and ESD Footwear)"

Per ESD- S1.1 paragraph 6.1.3 Frequency of Functional Testing "The wrist strap system should be tested daily to ensure proper electrical value."

Per ESD Handbook TR 20.20 paragraph 5.3.2.4.2 Additional User Wrist Strap Testing "Proper testing of the wrist strap includes the resistance of the groundable point on the end of the cord, the cord itself, the resistor, the cord-to cuff snap connector, the resistance of the interface of the cuff, the cuff/wrist interface, and the resistance of the person between the wrist and the hand that contacts the test electrode."

Per ESD Handbook TR 20.20 paragraph 5.3.2.2.2 Wrist Strap Ground Cord "At first glance, the ground cord appears to be a relatively simple assembly. However, the design requirements are considerable, given the wide range of user applications and the durability requirements of constant tugging, flexing, and dragging over the edge of workstation tops and equipment chassis."

Features:

• Three tests at same time; depress contact once to test footwear independently and wrist strap
• Wrist strap and footwear testing
• Split footplate design
• Independent alarming conditions
• Relay time for door locking systems
• Tests either single or dual wrist strap
• Made in America

User Manual