Desco SmartLog X3&trafe; Automated Personnel Grounding Verification Wrist Strap and Footwear Tester Automated ESD Record Keeping

The Desco EMIT SmartLog X³™ is designed for fast, frequent, and accurate testing of ESD personnel grounding items. By depressing the electrode button once, the SmartLog X³ tests the resistance path limits of the worn wrist strap and both worn ESD footwear independently within three seconds. Test results are electronically stored in the SmartLog X³™ and can easily be downloaded to a PC for logging records and evaluation. This product can be used as one of the tools to fulfill the ANSI ESD S20.20 paragraph 6.1.3.2 "Compliance Verification Plan. Verification should include routine checks of the Technical Requirements of the Plan."

Paperless data can enhance operator accountability, immediately identifying problems while reducing logging and auditing costs. There is no need to dedicate a computer. The SmartLog X³™ is a complete system including all required components. Operator identification can be accomplished by using the keypad, swiping a barcode card, or waving a proximity card (verify compatibility with the factory).

The SmartLog X³™ can test either single or dual-wire wrist straps; the split footplate design allows for individual footwear testing all in one test. If a resistance path is below or exceeds the set limits, failure will be noted via an audio and visual LED alarm. Passing tests can enable a relay for automated door openers. However, if the user desires to test the wrist strap and ESD footwear separately, this can be accomplished. The wrist strap test is activated by inserting wrist strap banana plug into the designated banana jack. Wrist strap only or footwear only testing can also be accomplished. See Software Technical Bulletin TB-6547 for more information.

32 SmartLogs can be daisy-chained and connected to one computer, allowing data to be collected to one central computer for all SmartLogs. The SmartLog X³™ can also be networked to a company's Intranet with the optional 50461 Ethernet Adapter. The SmartLog X³™ is calibrated to NIST traceable standards.

The SmartLog X³™ default Wrist Strap test range is 1M û 10M Ohms, and the default Footwear test range is 1M û 35M Ohms. The ranges can be easily adjusted.

Features:

• By depressing the electrode button once, the SmartLog X³™ tests the resistance path limits of the worn wrist strap and both worn ESD footwear independently within three seconds
• Versatile - can be used as Footwear only or Wrist Strap only tester
• Dual Independent Footwear and Wrist Strap Tester with latest automated logging
• Paperless data can enhance operator accountability immediately identifying problems while reducing logging and auditing costs
• No need to dedicate a computer
• All required components included in system
• Tests either single-wire or dual-wire wrist straps
• Operator can use keypad or swipe barcode reader
• Independent audible and visual alarm conditions
• Split footplate design allows for individual footwear testing all in one test
• Reads Code 39 and Code 128 Barcode
• TEAM Basic Software Included
• 32 Smartlogs can be daisy-chained and connected to one computer, allowing data to be collected to one central computer
• Use the optional DES-50461 Ethernet Adapter to network the SmartLog X³™ to the company's Intranet
• Enable Relay Time for door locking systems. Password protection enables the user to easily connect to automated door openers.

User Manual