Desco 10512 - FINISH, FLOOR, STATGUARD 5 GAL BOX

Statguard® Static Dissipative Cross-Linked Floor Finish is used to dissipate static charges as well as prevent triboelectric (static charge generation) charges while providing a clear, high gloss finish that resists wear. Statguard® Static Dissipative Floor Finish is a free flowing liquid emulsion, which can be applied on any hard surface or sealed floor including vinyl, vinyl asbestos, linoleum, rubber, asphalt, sealed (urethane or acrylic sealer) or painted wood, terrazzo and concrete. Statguard® technology eliminates the need for static control tile or floor mats. Statguard® dries in one hour and is ideal for clean room and electronic manufacturing, assembly, and test areas. For use in environments with relative humidity of 30-65%; for low humidity environments use Statguard®-LH.

Product Details:

• Non-tribocharging
  Limits charge generation when walking - <100 volts per ANSI/ESD S20.20
• Static dissipative
  With ESD footwear, removes the charge off your body
• Can be applied on many hard surfaces or sealed floors including vinyl, VCT, linoleum, rubber, epoxy, acrylic paint, and concrete
  Converts a non-ESD floor to an ESD floor
• *UL classified for slip resistance only
  Ensures worker safety and mitigates user¦s liability exposure
• 18% solids
  Easy to apply; improves productivity
• Cross-linked polymer
  Produces high-gloss, durable finish
• Low humidity formulation
  Provides greater durability in all humidity environments
• RTT 10E7 ohms per ESD S7.1 @50% R.H.
  
• Bag-in-box packaging
• Lead-free RoHS compliant
• Made in America

*IMPORTANT:Classified by UL as to slip resistance only, Statfree® and Statguard® provide superior electrical properties along with a safe walking surface. Underwriters Laboratory has evaluated Statfree® and Statguard® and tested them to their slip resistance standards. To ensure employee safety and to mitigate user's liability exposure, it is important to use floor finish that has been successfully tested for slip resistance, and is properly applied and maintained.

RTT: 10E7 ohms per ESD S4.1 @ 50% R.H. ,    pH: 8.9
Coverage: 2,000-2,500 sq. ft/gallon,           & nbsp;        Solids: 18%
Density: 8.4 lbs./gal,           &n bsp;             & nbsp;                    Water soluble