Hakko® N2 Controller & N2 Soldering Iron Handpiece

Hakko® FM-2026-KIT consists of the N2 Controller (FX-791) and FM-2026 Nitrogen Soldering Iron Handpiece. These products are to be used as part of the N2 Soldering System along with the FM-202 Soldering Station and FX-780 Generator (not included). It can also work with the FP-102 and the FM-203.

FX-791 Nitrogen Controller Specifications :

• Controls the Flow of Nitrogen to the FM-2026 Nitrogen Iron with the FM-202 and FP-102 Soldering Stations
• Controls the Flow Level from 0.25 l/min to 2.5 l/min. (recommended level 0.5 - 1.5 l/min.) and Should be Adjusted to the Tip Shape
• Outer Dimensions : 70(W) x 121(H) x 134(D)mm
• Weight : 600g
• Pressure Gauge for Discharged Gas : 0.2 MPa (2.0kg/cm²)
• Gas Flow : 0.25 l/min - 2.5 l/min

FX-2026 Nitrogen Soldering Iron Specifications :

• Supplies Hot Nitrogen (N2) Gas to the Soldering Area
• The Nitrogen Gas is Preheated as it Passes Along the Ceramic Heater in the FM-2026 Handpiece
• Soldering Efficiency can be Improved as the Hot Nitrogen Creates a Preheating Effect While Reducing the Amount of Oxygen in the Solder Connection Area (Less Oxidation)
• Power Consumption : 70W (24V)
• Tip to Ground Resistance : <2Ω
• Tip to Ground Potential : <2mV
• Cord : 4Ft. (1.2m)
• Length (w/o cord) : 8.1 " (205mm) w/tip
• Weight (w/o cord) : 0.1 lbs. (45g) w/ nozzle assembly and tip
• Tips Are Not Included
  
  Data Sheet & Manual
  
  * Shown with the N2 Soldering System - Not Included.