Item	Quantity

Home >> Item Detail

Item Code:	HAK-FA430-16
Quantity:

Volume Fume Extraction Unit

Pre-HEPA

FA430-16

Volume Fume Extraction Unit with Pre-HEPA
FA430-16, Maximum 2 Ports / 2 Stations

The FA430-16 is a volume fume extractor unit with pre-HEPA, and maximum 2 ports/2 stations, no arms, 120W.

Features:

Designed for use at soldering stations where it extracts contaminated air directly from the source and transfers it to the unit by flexible or rigid ducts

Powerful suction, quiet operation

Three airflow adjustment modes: High, medium, low

Two filters inside the unit remove contaminants from the air, then return the purified air to the area where the FA-430-16 is located

Pre-filter made from treated polyester material that removes coarse particles like dust and subsequently extends the life of the main HEPA filter

HEPA filter made from fiberglass paper medium and provides the greatest amount of surface area within the volume of the filter case

Standard filters contain an activated carbon element with absorption ratings of 80-85% and are also designed to extend the life of the main HEPA filter

Filter efficiencies are greater than 98% at 0.3 microns

Special filter replacement notification function detects the fan speed and notifies the operator of the appropriate time to replace the filters via indicator lights on the front panel

Power consumption: 120W

Maximum air flow:

One port: 145 CFM (4.1 cu.m./min.)
Two ports: 167 CFM (4.7 cu.m./min.)

Noise level: 44-53 dB @1m

Dimensions: 13.0" W x 14.4" H x 13.5" D (330 x 366 x 343 mm)

Weight (with filters): Approximately 16.5 lbs. (7.5 kgs)

HAK-FA430-16

Volume Fume Extraction Unit

Pre-HEPA

FA430-16